Electricity Cost & Solar Savings Calculator US

Turn monthly kilowatt-hours into a bill, then test a solar system size, sun hours, installed cost, and any incentive you have actually confirmed.

Enter your numbers

$
Many U.S. locations fall between about 3.5 and 6.0, depending on climate and roof aspect.
$
Leave at 0 unless you have confirmed a federal, state, or utility credit for your project. Programs change.

Bills, production, and a cautious payback

Your electric bill in this tool is a simple product of kilowatt-hours and a bundled rate per kilowatt-hour. Real tariffs may include a fixed customer charge, time-of-use periods, demand charges, or summer/winter tiers. If your utility publishes those pieces, you can still use an average effective rate from a recent bill (total energy charges divided by kWh) for a first estimate.

Solar production is estimated as system size × peak sun hours × 365 × a derate factor that stands in for inverter losses, soiling, wiring, and modest shading. Roof pitch, orientation, tree cover, snow, and equipment quality can move production a long way from that average. A site-specific design with a shading report is the right next step if the payback looks close to your cutoff.

Incentives are deliberately left to you. Federal investment tax credits, state credits, and utility rebates have changed over time and often depend on tax liability, installation date, domestic-content or siting rules, and whether the system is owned or leased. Enter a percentage only when you have confirmed it for your project. Leaving the incentive at zero produces a conservative cost. Payback is net cost divided by first-year bill savings, and the lifetime figure applies a yearly production decline without discounting inflation or changes in utility rates — both of which could help or hurt the real return.

Net-metering and successor tariffs decide whether extra midday power is credited at the retail rate, a lower avoided-cost rate, or something in between. That policy can matter as much as panel price. Ask your utility how exports are credited before you treat the “offset” percentage as cash in your pocket. This page is a planning sketch, not an investment prospectus or tax opinion.

Before you sign, compare at least two installer proposals on the same usage history and ask each one to show first-year kilowatt-hour production, the assumed utility tariff, and which incentives are already included in the price. If those assumptions differ, the advertised payback is not comparable.

Frequently asked questions

Where do I find peak sun hours?

National renewable-energy maps and installer proposals often list them. If you do not have a figure, 4.0–5.0 is a cautious starting range for many of the Lower 48, but coastal Pacific Northwest and the Desert Southwest sit on opposite ends.

Why is the default incentive zero?

Because incentive law changes, and a wrong credit would overstate savings. If you confirm a credit or rebate, enter it as a percent of gross installed cost.

Does this include battery storage?

No. Add battery hardware to the cost per watt or to a higher gross cost, and do not assume the same payback, especially if the battery is sized for backup rather than daily arbitrage.

Is a shorter payback always better?

It is a convenient yardstick, not a complete financial plan. Loan interest, roof replacement timing, moving before payback, and tariff changes all matter.

Results

Enter figures to see an estimate.